[JT78]

I’ve really been thinking about getting one of these. So you haven’t had any issues with it?

[JT78]

I run Longshot or cfe pistol for all of my hand loads. When the supply chain gets better I might try some BE86 down the road but for now I’m using the stuff I already had stocked up before all the shortages.

[JT78]

Pics seem to be too big.

[JT78]

I’ve got a S&W 1076 (my first 10mm) then a Glock 20 gen 3, a Springfield Ro Elite 10mm, a Dan Wesson Razorback 10mm, and a RIA 10mm.

[JT78]

All the other powders stayed the same for 180gr except the Longshot.

[JT78]

Shadow if you look at the old load data from hodgdon for the 180 and 200gr it used to show 8.5 – 9.5 gr of longshot for the 180 and 7.0 – 8.2 GR for the 200gr bullet. If you look at the website data the 180gr is 7.0-8.2 and the 200gr is the same 7.0-8.2 I believe they screwed up when they updated the website.

[JT78]

Just curious how long the 200 grain XTPs are. I’ve been loading the 200 grain gold dots under eight grains of long shot at 1200 ft per second average with a 5-in barrel 1911 and 22 lb spring any higher and it was showing serious pressure issues.

[JT78]

Glad to see the forum is still available, I know at one point I went to check in on the forum and it was down. Did we lose all the wonderful and valuable information that was once here?

[Author]

Posts