- This topic has 1 reply, 2 voices, and was last updated 1 year, 3 months ago by
.
-
Posts
-
-
I started reloading 2-1-21 with 10mm. I got a single stage rock chucker and a thousand berry plated 180gr at.401”. Started casing when I ran out of plated bullets. I made my own lube then latter tried shake and bake powder coating on several different bollits and loads. I’m going back to lube. I however am liking the PC for 9mm.
Just trying to get this forum started. Pillsnpwd. -
Awesome Pillsnpwd! I have been handloading for myself since 1978 and started loading for the 10mm at the very start of 1990 to feed my S&W1006.
I have also cast my own bullets for many of my firearms to include the 10mm/40 caliber. I use traditional lube but have considered the powder coat process. Since I ran out of the Rooster Labs Red Zambini lube I now use White Label Carnauba Red being my current lube applied with a STAR sizer. I still have some RCBS lube loaded in my RCBS sizer / lubricator which I started out with for several cartridges.
The sizer die in my STAR for 40 caliber sizes at 0.4015″ and has yielded a good fit for 10mm even driving then at upper velocities.
I have the RCBS 175 grain TC SWC, RCBS 200 grain TC SWC, Lyman 175 TC and the rare Lyman 156 grain Devastator HP. (see attached picture)
-
- You must be logged in to reply to this topic.