Author Topic: 9x25Dillon Testing March 14th 2015  (Read 3300 times)

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
9x25Dillon Testing March 14th 2015
« on: March 14, 2015, 03:06:42 PM »
9x25Dillon Testing March 14th 2015  72 degrees
Glock 20SF 6.02” LWD BBL

115gr HST JHP COL 1.250”
CFE 10.4 grains 350CCI
Velocity 1715 fps

115gr HST JHP COL 1.250”
LongShot 10.8 grains 350CCI
Velocity 1745 fps

121gr Zero JHP COL 1.250”
AA#9 13.0 grains 350CCI
Velocity 1420 fps

121gr Zero JHP COL 1.250”
AA#7 11.2 grains 350CCI
Velocity 1350 fps

121gr Zero JHP COL 1.250”
Power Pistol 10.0 grains 350CCI
Velocity 1658 fps
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Centimeter

  • Jr. Member
  • **
  • Posts: 162
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #1 on: March 14, 2015, 03:16:34 PM »
Phew, that's smokin'! :o I'm curious to see how the HST holds up to that kind of velocity. A lot of people have mentioned the ceiling for that bullet being around the 1250fps range. Thank you for your diligent work!

Pablo

  • Full Member
  • ***
  • Posts: 875
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #2 on: March 14, 2015, 04:07:12 PM »
Nice. Thank you!!

When I eventually load 9x25 the Longshot data is VERY handy!!

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #3 on: March 14, 2015, 04:38:37 PM »
The HST's were some pulled bullets, I picked up and decided to test with them.
They do bust up in water jugs!



The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #4 on: March 14, 2015, 05:39:02 PM »
Interesting. I wonder how a 124gr JSP would do on one of those?

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #5 on: March 14, 2015, 06:53:22 PM »
I have gotten some 125's to near 1750 fps, Just need to up the LongShot a little.
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Pinsnscrews

  • Jr. Member
  • **
  • Posts: 380
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #6 on: March 16, 2015, 11:35:38 AM »
so uhm...how about a "9x25 Maximum" and use 10mm Magnum Brass and keep the case length as close to 10mm Magnum length as possible.

<sickandtwistedgrin>
It's my DiMMe

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #7 on: March 16, 2015, 12:55:47 PM »
There are two forms of the 9x30 one using 357Sig tapered neck and the other a 9x25Dillon Neck to shape the 10mm Magnum cases.  Most were being shot in TC with BullBerry Barrels as I recall.



I have so other pictures but can locate them at the moment...
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Pablo

  • Full Member
  • ***
  • Posts: 875
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #8 on: March 16, 2015, 01:10:33 PM »
Want in AR platform.  ;D

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5628
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #9 on: March 16, 2015, 03:27:08 PM »
Good info Shadow...Thanks for posting.

Pablo, for the AR platform I have been thinking about a much, much bigger wildcat.  A 450 grain .416 bullet in a 308 case necked up.  Kinda a 416 blackout if you will.  I want it to work in my AR-10, and duplicate the ballistics of the 300 blackout for very, very heavy hitting silent plinking.

Not sure it has much real world utility, but I have a ton of 308 brass around, and a couple of AR-10 lowers.  And an imagination that gets me in trouble.

Randy Shelley

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #10 on: June 05, 2015, 11:59:25 PM »
Gentlemen, I built 9x25 in 1988 and built the 9x30 in 1993. I enjoy reading your posts. At some point I'll post some photos for you on here. Shadow, I have followed several of your posts, over the years, thanks for all you have done to keep this cartridge alive and well.

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #11 on: June 06, 2015, 07:29:14 AM »
Randy, so very glad you signed on here and yes I we would greatly appreciate you sharing your pictures and experiences with the 9x25 and 9x30 cartridges.  I think I have copies of the notes from back in the day from Jay Phillips that were shared by a fellow named Fred Ross.  In the PM I sent you I may have confused myself, as Jay was the one who works at Berry's Bullets.  Or you do you also? ???

Thanks for dropping in and looking forward to what you can share about the history and development as you know it!  ;D
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Pablo

  • Full Member
  • ***
  • Posts: 875
    • View Profile
Re: 9x25Dillon Testing March 14th 2015
« Reply #12 on: June 06, 2015, 07:39:58 AM »
I approve this thread!!

Overkill338

  • Jr. Member
  • **
  • Posts: 354
  • G29SF@1130 w/200s/9x25@1540 w/124s
    • View Profile
    • Underwood Ammunition
Re: 9x25Dillon Testing March 14th 2015
« Reply #13 on: May 10, 2017, 05:23:27 PM »
I'm wondering about data from a 3.78" barrel. I found someone with a 1522 average using a 124gr Nosler Bonded by Underwood.
If you can't shoot minute of bad guy, and get faced with a gun fight, spend your last minutes Praying,Begging, Running or all 3