Author Topic: Gen5 reloading issue with oal  (Read 143 times)

Thomasg20

  • Newbie
  • *
  • Posts: 15
    • View Profile
Gen5 reloading issue with oal
« on: September 24, 2017, 11:54:59 AM »
Hello guys got a gen5 block g17 .
Issue the load I was wanting to try was vvn 3n38 147gr xtp .
Start load was 6.3gr of 3n38 and 147gr xtp oal 1.142
Ok I set everything up 1.145 ish oal and it's a no go the oal is way to long base of the case over hangs the barrel hood by a good .050 if not more .
Question can I safely shorten up the oal that much with this load??
Thanks for the replies.