Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Intercooler

Pages: [1] 2 3 ... 64
   I thought someone might have these pieces. Kind of a long shot.

Factory 10mm ammo / MOVED: Another Tanfoglio added to the stable
« on: December 11, 2017, 01:31:25 AM »

Handguns / Another Tanfoglio added to the stable
« on: December 10, 2017, 04:37:11 PM »
  This one is what they label "Limited Custom" now, in 9mm. It has some subtle changes I plan on finding out about ASAP. I know the dovetail is shaped different and possibly a better sear. With what EAA charges for conversion kits and parts... good deal regardless!

  Since the Limited Pro's just aren't out there and I wanted a Chromed 4.75" version,this one will be switched up some. I'm dumping the magwell and want to try Lok panels on it.


     I tore down my old Hunter this morning at the request of a member to see what the wear looks like on the parts. The slide locking lugs and ejector modification has some interest. This after several years, a frame hard chrome job and several thousand 10mm bombs through it.

This is where the guide rod sets in the frame channel. Basically why the cone guide-rod was created. It still looks pretty new there and also on the slide landing area on top. Original spring, etc...

General Discussion / James Yeager terminated
« on: December 07, 2017, 01:05:03 AM »
I wonder what he did now to get terminated from YouTube?

   I have been on a mission with this one! My K100 shot 1" low even with the stock sights. When I switched to fiber-optic, that went to 2"! I emailed GP direct to get the dovetail drawing and they come through.

    One of my friends with a MK7 is interested in having one made for his while my slide is there getting the first test-fitting. Would anyone be interested in one? Can someone check the P40 cut and see if it's the same?

The only MFG that would work with me on this was Kensights. This is what they suggested to cut it down from 12.5mm to 10.5mm and change the 65 degree angle to 40 degree.

Gunsmithing / Put grip tape on the Grand Power K100 and Springfield XD
« on: December 03, 2017, 07:44:28 AM »
  I put this version on:;sc=1

It's plenty sticky enough to where the skater version isn't needed:

I put the same rubber version on my Wife's XD and she loves it a ton more than the fatter Hogue grip we had on it. The nice part about these is how little it adds to the grip size.

10mm semi-auto handguns / Henning optic mounts
« on: November 29, 2017, 03:10:43 PM »
  Since my Grand Power has no hope with a sight fix, I'm stripping it! It's getting a first ever for me optic! Might as well beat it like it owes me money with one!  :P

   Henning is making the plates now and sending them for PVD coating. I'm just waiting to hear what optic he finds works best in his field testing. It will more than likely be a Romeo or Deltapoint. If someone has something that is a cut above those post it up for review. Some pictures...

Handguns / Trip to the gun store tonight
« on: November 26, 2017, 04:47:18 PM »
   I have two that are fairly local and nice places, but not much inventory or selection. Given that... I went to one which does have a decent amount of stuff and the whole crew basically sucks!
   I went back and forth looking for the CZ section and finally one of them asked if I was looking for something. The middle section I stood at eyeballing 4 or 5 models without the same group asking if I wanted to take a look at one. I gave it another 5 minutes and just left  >:D It's no wonder why I do almost all my buying on the internet!
   They did have this cool looking Sig P320 RX with a Romeo optic on it for $900. Anyone know about that optic and what other pistols might have it installed like that? I kind of always wanted to try a red-dot optic!
 The other neat one was a Walther Q5 Match.

Factory Ammo / Reed's Ammunition .357 Magnum 200gr Hardcast
« on: November 24, 2017, 07:59:04 PM »
I haven't come across a .357 Magnum Hardcast until seeing this one

Handguns / New Tanfoglios
« on: November 24, 2017, 07:51:56 PM »
   I bet many of these won't show up here... still interesting to see!

Factory Ammo / Fenix Ammunition .357 Magnum 125gr JHP and 158gr FP
« on: November 22, 2017, 03:49:58 PM »
   The 125's were listed to be "new" in Starline brass. I see mixed headstamp with brass and nickel! Not happy about that and contacted them on it. I'm really doubting the 1650 FPS now out of any barrel length!

General Discussion / 2018 Gun Preview
« on: November 20, 2017, 03:34:40 AM »
   Hopefully some unexpected stuff turns up at Shot Show. We already knew zero 10mm's. The Bersas are the only interesting ones to me.

Reloading / Shell Shock NAS3 Casings
« on: November 19, 2017, 05:09:19 AM »
    Any thoughts on these? I know SwampFox was wanting to put a Steel ring inside brass to push 10mm even harder. Does any of the technical aspects of it make it a cut above Brass?

Pages: [1] 2 3 ... 64