Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Bat Rastard

Pages: [1] 2 3 ... 5
Reloading / Re: Is W231 / HP-38 heat sensitive?
« on: December 23, 2017, 05:12:10 AM »
Update (final):
Bad cases.  I found cracks on the bases of some of my ammo.
I found them working up a new load. New loads get extra inspection or I would not have caught it.
I have added a plunk test in a case gage on all ammo now. About 1% of my ammo wouldn't go in the gage, but would easily chamber in the barrel.
I went back and "plunked" all of my ammo and believe the issue is resolved.
Merry Xmas amigos!

Any issues?

Reloading 10mm ammo / Re: Thinking of buying a Lee Pro 1000
« on: December 21, 2017, 08:53:56 PM »
I started with a Lee 1000. The powder charger hung up.
I went to a Dillon 550 25 years ago. I couldn't be happier.
Were I getting started now, I would likely get a Dillon 650 for the 5th station.

Miscellaneous 10mm Firearms / Alpha Wolf Carbine
« on: December 20, 2017, 06:31:08 PM »

Logically. they will have to follow up with a 10mm.

10mm semi-auto handguns / Re: Flat bottom firing spring stop?
« on: December 16, 2017, 03:32:25 AM »
I put a Wilson on my Kimber. It was an improvement, but not a huge one.

Gear/Equipment / Re: Modifying a Comp-Tac MTAC for G20 to fit a G40
« on: November 29, 2017, 03:35:01 AM »
I heated the holster and made it into a "slide". I am quite pleased.

Range reports / Re: First time with Underwood Ammo
« on: November 18, 2017, 11:27:40 PM »
Yes the case will swell out to 0.4340" anything larger may show a distinct line which would be called a SMILE.

Normal sized casing are 0.4215" to about 0.4230" so yes those Glock barrels are loose...

If you are a reloader, These will make the swelling go away.

Reloading 10mm ammo / Re: Where does 10mm brass hide those little legs?
« on: November 15, 2017, 03:47:09 AM »
I put a small radius main spring housing and a heavier spring on my Kimber and I got the brass to stay a fence post closer. I still lose a lot of brass. My Glocks are better behaved on the brass but the Kimber is much more accurate.

Reloading 10mm ammo / Re: Want to start reloading again
« on: October 21, 2017, 04:11:21 PM »
If not needing volume capability, single stage is good.
If a progressive is in order, pick your brand and run with it.
Mine is a Dillon 550 and has served me well for 25 years or more. Were I starting over I would get the 650.
Buy once, cry once. Don't compromise on equipment.

Miscellaneous 10mm Firearms / JR Carbine in 10mm
« on: October 13, 2017, 04:18:37 PM »
Anyone have one?

10mm Hunting / Re: Going to hunt with my G29
« on: October 11, 2017, 03:36:53 PM »
Now I'm leaning towards some fiber optic sights after seeing a set. The Truglo TFO sights look really nice.

They are nice.

10mm Hunting / Re: Going to hunt with my G29
« on: October 10, 2017, 03:49:08 PM »
I think you would get more bang for the buck with the sights.

10mm Hunting / Re: First pistol deer
« on: October 10, 2017, 03:38:54 PM »
I will, but with a rifle!

10mm Hunting / Re: First pistol deer
« on: October 08, 2017, 08:48:10 PM »
Both lungs and a toasted heart. Ran 20yards, game over.
Almost 2 years ago I began a quest to get a deer with my carry gun. I started with a G29 that I missed a buck with last year. I bought a Kimber that I shot better, but wasn't completely satisfied on reliability for carry. Bought  a G40 and have carried it or the 29 ever since. Mostly the 40, really the 40.
Now that I have completed the quest I think I will go back to carrying 9mm.  ;)

10mm Hunting / First pistol deer
« on: October 08, 2017, 07:19:14 PM »
G40, 17 yards, Underwood 180xtp.

Pages: [1] 2 3 ... 5