10mm-firearms.com

Other Ammunition Calibers => Factory Ammo => Topic started by: Intercooler on November 16, 2017, 02:02:01 PM

Title: Buffalo Bore 9mm 147gr Hardcast
Post by: Intercooler on November 16, 2017, 02:02:01 PM
  I have been wanting to try these for a while now and I see they're loaded in JAG brass.

(https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/23519264_1592479520790074_7660110611595960813_n.jpg?oh=f5463275bf4eecd075200c9215fdccc1&oe=5A8E5252)
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: The_Shadow on November 16, 2017, 03:03:44 PM
That's interesting to see!  :o
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: Intercooler on November 16, 2017, 03:31:22 PM
This is what that guide used to down the Bear charging his clients.
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: Intercooler on November 27, 2017, 02:56:05 PM
Springfield XD 4" 1092, 1083. Average 1087.5 FPS/ 386 LBS
EAA Elite Limited 4.75" 1112, 1105 Average 1108.5 FPS/ 401 LBS

Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: SPDSR on December 20, 2017, 05:18:47 AM
FYI these would not work in either of my CZ’s. They would lock everything up. The bullet would pull out of the casing and lodge in the barrel. Likely due to the tight chambers of CZ’s. Not a winning combo. Worked great in my G19.
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: Intercooler on December 20, 2017, 11:28:14 AM
Hmmm... I ran it in the XD. It measured out to be a tight chamber as well.
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: my_old_glock on December 27, 2017, 03:38:04 PM
FYI these would not work in either of my CZ’s. They would lock everything up. The bullet would pull out of the casing and lodge in the barrel. Likely due to the tight chambers of CZ’s. Not a winning combo. Worked great in my G19.

CZ pistols have the tightest chambers out of any 9mm I have encountered. They also have a short throat. I do not think their chambers are to SAAMI specification.


.
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: SPDSR on December 28, 2017, 10:37:55 AM
I can’t imagine a company like CZ would make chambers not in spec, but they are tight.
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: Intercooler on December 30, 2017, 02:21:12 AM
That sucks! I want guns that run it all and would seek to make it so!
Title: Re: Buffalo Bore 9mm 147gr Hardcast
Post by: SPDSR on December 31, 2017, 07:34:00 AM
It’s the only round I’ve found that the CZ’s didn’t like.