Author Topic: 9mm Ammo Factory/Commercial Ammo pulldown  (Read 71721 times)

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #285 on: November 20, 2016, 12:32:17 PM »
Cartridge is from Ammo Manufacture: Tulammo 115gr FMJ Silver Bullet (provided by Intercooler 11/20/16)
Ballistics Information: 9mm
Muzzle Velocity: 1150 fps
Muzzle Energy: 338 ft. lbs
Brass Make/Headstamp: Tulammo – Steel
Bullet Make/Weight/Construction/Info; Length 0.6170”/Dia. 0.3550”: 115 gr. FMJ
Actual weight 115.0 grains (exposed lead base)(steel jacket) Crimp line 0.3545”
C.O.A.L.: 1.1625” 
Primer: Brass color (Berdan)
Case: Diameter 0.3880” Crimp Diameter 0.3760” Length 0.7490”
Powder Description/Positive ID/Type/Charge Weight:  ? Vihtavuori N340?  5.0 grains *
*Possible powders N340 (irregular short cut rod)







« Last Edit: November 20, 2016, 12:54:45 PM by The_Shadow »
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #286 on: November 20, 2016, 01:30:54 PM »
Cartridge is from Ammo Manufacture: RWS 85gr NTF(Non-Toxic Frangible) Copper Matrix CM9 (provided by Intercooler 11/20/16)
Ballistics Information: 9mm
Muzzle Velocity: 1426 fps
Muzzle Energy: 452 ft. lbs
Brass Make/Headstamp: RWS – Brass
Bullet Make/Weight/Construction/Info; Length 0.6720”/Dia. 0.3555”: 85 gr. NTF
Actual weight 85.4 grains (Copper Matrix)(Non-Toxic Frangible) Crimp line NA
C.O.A.L.: 1.1310” 
Primer: Small Pistol Nickel Color
Case: Diameter 0.3875” Crimp Diameter 0.3790” Length 0.7475”
Powder Description/Positive ID/Type/Charge Weight: ? Ramshot Silhouette?  6.4 grains * (fine flatten ball)

Copper Matrix NTF Bullets contain no toxic heavy metals such as lead. Frangible bullet construction immediately disintegrates into small fragments upon striking a hard steel surface. Back splatter is eliminated. Ricochet potential is significantly reduced. Copper Matrix NTF ammunition functions reliably with duty weapons without modification.
Ruag Ammotec Usa Inc.







The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #287 on: November 20, 2016, 02:10:40 PM »
Cartridge is from Ammo Manufacture: Tulammo 115gr FMJ Silver Bullet (provided by Intercooler 11/20/16)
Ballistics Information: 9mm
Muzzle Velocity: 1150 fps
Muzzle Energy: 338 ft. lbs
Brass Make/Headstamp: Tulammo – Steel
Bullet Make/Weight/Construction/Info; Length 0.6170”/Dia. 0.3550”: 115 gr. FMJ
Actual weight 115.0 grains (exposed lead base)(steel jacket) Crimp line 0.3545”
C.O.A.L.: 1.1625” 
Primer: Brass color (Berdan)
Case: Diameter 0.3880” Crimp Diameter 0.3760” Length 0.7490”
Powder Description/Positive ID/Type/Charge Weight:  ? Vihtavuori N340?  5.0 grains *
*Possible powders N340 (irregular short cut rod)





Less powder and different powder than the old Gold bullet version. Interesting!
« Last Edit: November 20, 2016, 02:12:36 PM by Intercooler »

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #288 on: November 20, 2016, 02:36:01 PM »
Cartridge is from Ammo Manufacture: Winchester USA Forged Steel Cased 115gr FMJ (provided by Intercooler 11/20/16)
Ballistics Information: 9mm
Muzzle Velocity: 1190 fps
Muzzle Energy: 365 ft. lbs
Brass Make/Headstamp: WIN Winchester – Steel
Bullet Make/Weight/Construction/Info; Length 0.5935”/Dia. 0.3545”: 115 gr. FMJ
Actual weight 115.4 grains (exposed lead base)(concave base) Crimp line 0.3535”
C.O.A.L.: 1.1590” 
Primer: Small Pistol Brass color
Case: Diameter 0.3890” Crimp Diameter 0.3760” Length 0.7455”
Powder Description/Positive ID/Type/Charge Weight:  ? AutoComp ?  5.2 grains *
* could be a special derivative of AutoComp (flatten ball)







The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #289 on: November 20, 2016, 04:23:41 PM »
Cartridge is from Ammo Manufacture: PMC 9A 115gr FMJ (provided by Intercooler 11/20/16)
Ballistics Information: 9mm
Muzzle Velocity: 1150 fps
Muzzle Energy: 338 ft. lbs
Brass Make/Headstamp: PMC – Brass
Bullet Make/Weight/Construction/Info; Length 0.5930”/Dia. 0.3550”: 115gr. FMJ
Actual weight 115.4 grains (exposed lead base)(concave base)(black sealant) Crimp line NA
C.O.A.L.: 1.1560”
Primer: Small Pistol Brass color
Case: Diameter 0.3865” Crimp Diameter 0.3775” Length 0.7500”
Powder Description/Positive ID/Type/Charge Weight: ? ? 4.0 grains *
*(very fine flatten ball silvery color) (powder is similar to TightGroup but more energetic)







The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #290 on: November 20, 2016, 05:18:04 PM »
Cartridge is from Ammo Manufacture: Browning Performance Target PBT 115gr FMJ (provided by Intercooler 11/20/16)
Ballistics Information: 9mm
Muzzle Velocity: 1190 fps
Muzzle Energy: 365 ft. lbs
Brass Make/Headstamp: Browning BuckMark – Brass
Bullet Make/Weight/Construction/Info; Length 0.5870”/Dia. 0.3545”: 115gr. FMJ
Actual weight 114.6 grains (exposed lead base)(concave base) Crimp line 0.3505”
C.O.A.L.: 1.1620”
Primer: Small Pistol Brass color
Case: Diameter 0.3860” Crimp Diameter 0.3745” Length 0.7475”
Powder Description/Positive ID/Type/Charge Weight: AutoComp 5.4 grains *
*(fine flatten ball silvery color) Designed to match the BXP Personal Defense







The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #291 on: November 20, 2016, 05:52:47 PM »
Cartridge is from Ammo Manufacture: Federal HST 150gr HST HP (supplied by Intercooler 11/20/16)
Ballistics Information: 9mm
Muzzle Velocity: 900 fps
Muzzle Energy: 270 ft. lbs
Brass Make/Headstamp: Federal Cartridge – Nickel
Bullet Make/Weight/Construction/Info; Length 0.6920”/Dia. 0.3545”: FED 150gr. HST
HP depth 0.1650” / HP dia 0.1830” (tapered) / HP mouth 0.2260”  Six long segments
Actual weight 149.6 grains   (flat base) (Cannelure) (black sealer)
C.O.A.L.: 1.1185”
Primer: Small Pistol Nickel color
Case: Diameter 0.3855” Crimp Diameter 0.3775” Length 0.7470”
Powder Description/Positive ID/Type/Charge Weight: AutoComp 4.0 grains







The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

tdogg

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #292 on: December 24, 2016, 08:58:45 AM »
Wow! I had to register just to thank you for this wealth of information!  Tons of good info in this thread!  Most notably the muzzle velocities, bullet lengths, and the cartridge overall lengths.  Really helpful when doing your own load development and need to compare seating depths with published load data and your particular components.

Thanks again!
Cheers,
Toby

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 9mm Ammo Factory/Commercial Ammo pulldown
« Reply #293 on: December 24, 2016, 09:08:08 AM »
Welcome to the forum tdogg!  Best regards!
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna