Author Topic: 10mm Handgun Spec Sheet  (Read 8349 times)

The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7282
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #30 on: October 30, 2016, 05:39:27 PM »
Here are the Bren Ten Specs...

Bren Ten Standard Model Weight empty 38-39 oz with magazine (38 oz Wooden Grips) - 34 oz without magazine
Barrel weight / Slide / Recoil 17 oz
Frame weight 17 oz
Slide weight 12 oz
Barrel weight 3 oz
Bore 0.3990” (as best I can measure)

Bren Ten Military & Police Weight empty 38 oz
Bren Ten Special Forces Weight empty 33 oz
Bren Ten Dual Master Weight empty 33 oz
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5628
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #31 on: October 31, 2016, 06:48:10 AM »
The Bren Ten Standard model aligns VERY closely with an EAA Witness full size steel.

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #32 on: October 31, 2016, 08:17:17 AM »
Interesting! I didn't know they made four models.

GoldBead

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #33 on: December 29, 2016, 07:08:44 PM »
The sig P220 reminds me of a cross between the S&W Model 1006 and the Bren Ten full-sized model. I think this pistol, or the Glock 20 would be the best pistol for the US Marines to carry into combat. Thread the barrel for a suppressor and you'd be "good to go".

Captain O

Hell Yes! A sub-gun in 10mm would be breath taking. Even with 180 grain FMJ, we are talking well over 700 ft/lbs of 10mm.

undeRGRound

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #34 on: February 26, 2017, 06:18:12 PM »
OK, got a new Witness Hunter coming, looking for info on this one such as compatibility with full power 10mm (I have a LOT of Underwood!) Also looking for grips, and a threaded barrel, ~6.6" or so total length. 

I take it that the 4.7 under Barrel for the 6" W.H. is barrel weight in ounces?  I like a 3# handgun, especially for the hotter loads  ;D

gandog56

  • Senior Member
  • ****
  • Posts: 1760
  • I love my 10mm's!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #35 on: March 03, 2017, 07:04:49 PM »
I can't find no 10mm Witness's locally to see if a double stack would even fit in my small short fingered hand.

I am sticking to single stacks till I can feel one. But I do have a 6 inch one.
Some people think I'm paranoid because I have so many guns. With all my guns, what do I have to be paranoid about?

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #36 on: March 04, 2017, 01:15:24 AM »
The dimensions should give you a good feel. I think if you don't mind the feel of a 1911, the Witness will be just so much better.

gandog56

  • Senior Member
  • ****
  • Posts: 1760
  • I love my 10mm's!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #37 on: March 13, 2017, 08:27:20 AM »
Yes, well my 1911's are single stack. The reason I never got an LAR Grizzly, or a Coonan .357, or a Desert Eagle is my hand will not fit around huge grips. I am uncomfortable with Glock double stacks, are EAA Witness's any better?
Some people think I'm paranoid because I have so many guns. With all my guns, what do I have to be paranoid about?

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #38 on: March 13, 2017, 09:48:22 AM »
Very much so!

gandog56

  • Senior Member
  • ****
  • Posts: 1760
  • I love my 10mm's!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #39 on: March 23, 2017, 06:54:13 PM »
Well dang it, there is not one gun store here I know of that stocks them!
Some people think I'm paranoid because I have so many guns. With all my guns, what do I have to be paranoid about?

bnolsen

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #40 on: July 08, 2017, 08:26:22 AM »
Tanfoglio EAA Witness all steel wonderfinish 2004

full weight: 41
without mag: 37.5
slide assembly: 17.2 (henning)
barrel: 4oz
frame: 19oz

bnolsen

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #41 on: July 08, 2017, 08:33:23 AM »
Tanfoglio Witness compact full steel wonderfinish 2003

full weight: 36.2
without mag: 33.5
slide assembly:  15 (henning)
barrel: 3.8
frame: 17.2

bnolsen

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #42 on: July 08, 2017, 08:41:12 AM »
Glock 20 gen2 (pre clinton ban)

full weight: 31 (with hogue, glockmeister metal guide rod):
without mag: 28.2
slide assembly:  21
barrel: 5.8
frame: 6.5

ugh math doesn't add up on this one...also imprecise analog scale
« Last Edit: July 08, 2017, 08:51:52 AM by bnolsen »

anthaynes96

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #43 on: September 02, 2017, 09:34:44 AM »
Glock gen4 G40 10mm MOS

Gun without mag 2lb 0.50 oz
Gun with loaded mag. with 180 fmj 2lb 12.75oz
Slide assembly: barrel and spring still in. 1lb 11.55oz
Barrel  5.90oz
Slide 1lb 4.90oz
Factory spring 0.75oz
Frame 5oz


Sent from my SM-G935V using Tapatalk