Author Topic: 10mm Handgun Spec Sheet  (Read 8350 times)

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5628
    • View Profile
10mm Handgun Spec Sheet
« on: November 25, 2015, 09:37:18 AM »
The purpose of this sheet is to document relevant but often not published data about handguns for our favorite rounds.  In particular, actual weight of the entire gun with an empty factory mag, weight of the slide assembly (anything that moves with the slide), barrel, slide, and the slugged bore diameter.

I am publishing this in a table in this post.  If you have a firearm to add, please take as many of the measurements as you can and then post them.  I will vet and add them to the table along with the submitter.

Clarification:  All values are weights except the slug diameter.  The goal of this table is not to regurgitate values commonly found on mfg websites, but to document values we care about with high impulse guns that are NOT commonly found.  Specifically, the weight of the reciprocating mass.

Make    --Model              --Weight    --Slide Assembly    --Barrel    -- Slide    --Slug Diameter    --submitter
Glock29 Gen227.720.63.916.10.402sqlbullet
Glock20 Gen 3 SF30.622.34.717.10.402sqlbullet
EAAWitness FS (2008)**40.717.33.812.30.4005sqlbullet
EAAWitness Match (2008)**42.418.54.013.40.4005sqlbullet
ParaP16-4040.018.94.312.80.399sqlbullet
SigP220 Elite 10mm44.320.74.314.85Unkcgreth
EAAWitness Compact36.215.33.211.2UnkDenStinett
EAAWitness w/Longslide41.918.54.013.3UnkDenStinett
ColtDelta Gold Cup*39.719.954.113.3UnkDenStinett
EAAElite Limited46.119.14.812.8UnkIntercooler
EAAHunter 6"48.022.04.714.7UnkIntercooler
EAAElite Limited Pro42.718.93.913.6UnkIntercooler
RIATactical II FS SC4321.25.513.3UnkZanderman
STIPerfect 1044.825.06.515.7Unkottoman
Bren TenStandard Model3817312.3990The_Shadow
RugerSR1911 10mm38.120.45.013.2Unksqlbullet
RIARock Ultra HC 10mm44.121.15.513.3Unksqlbullet
RemingtonR1 Hunter 10mm45.322.84.915.7UnkBeemer!

*Denotes a gun with aftermarket parts installed that would alter the factory weights.
**More recent models are known to have design changes that may impact weights, such as rails.
« Last Edit: July 09, 2017, 10:04:46 AM by sqlbullet »

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #1 on: November 25, 2015, 09:47:20 AM »
Match 4.0" barrel?

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5628
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #2 on: November 25, 2015, 10:07:40 AM »
barrel weight in ounces.

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #3 on: November 25, 2015, 10:45:15 AM »
I have 1006 and Match weights somewhere.

gandog56

  • Senior Member
  • ****
  • Posts: 1760
  • I love my 10mm's!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #4 on: November 27, 2015, 12:09:57 PM »

Product Name DW Razorback – 10mm
SKU 01907
Firearm Type Handgun
Purpose Hunting
MSRP $1,480.00
Chambering 10mm
Magazine Capacity 9
Magazine Type Single Stack
Frame Stainless Steel
Grips Cocobolo Double Diamond
Trigger Mech SA
Sights Fixed Tactical Sights
Barrel Match
Barrel Length 5 in
Weight 2.4 lbs
Overall Length 8.75 in
Height 5.5 in
Width 1.45 in
Safety Manual Thumb Safety Grip Safety
Some people think I'm paranoid because I have so many guns. With all my guns, what do I have to be paranoid about?

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5628
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #5 on: December 14, 2015, 03:09:55 PM »
Complete weight of pistol and empty factory magazine - 2 lbs and 12.25 oz

Slide with barrel and spring - 1 lb and 4.70 oz

Barrel only - 4.30 oz

Under zoom which i did for the pictures, there is a very thin portion of the cartridge that is unsupported by the feed ramp.   Still looks too small to be an issue with case bulges, smileys or blow outs.

ppro

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #6 on: December 14, 2015, 08:10:07 PM »
sqlbullet

In your spec for the 220 10mm you list the barrel length at 4.3 inches.
Spec for the 220R shows as 5.03 inches....
Just wondering....and slide weight ?

thanks

BEEMER!

  • Contributing Member
  • Jr. Member
  • ***
  • Posts: 351
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #7 on: December 15, 2015, 04:14:32 AM »
Both the numbers are weights of those individual pieces, not lengths.

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5628
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #8 on: December 15, 2015, 07:05:16 AM »
ppro, you weren't the first to be confused.  I have edited the original post for clarification.  The goal here is to document specs that the makers don't usually publish, but that we care about as enthusiasts.

ppro

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #9 on: December 15, 2015, 11:44:50 AM »
Thanks for the edit.
I didn't know if there was a model I wasn't aware of, or if the specs were different.
Since it is the 5" your talking about, the the slide weight etc wouldn't change which was all I was wondering.

dakota1911

  • Jr. Member
  • **
  • Posts: 126
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #10 on: December 22, 2015, 08:35:29 AM »
That is interesting information.  Manufacturers spec sheets usually give you a "high level" view.
NRA Life Member

Captain O

  • Jr. Member
  • **
  • Posts: 399
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #11 on: December 23, 2015, 06:35:13 PM »
The sig P220 reminds me of a cross between the S&W Model 1006 and the Bren Ten full-sized model. I think this pistol, or the Glock 20 would be the best pistol for the US Marines to carry into combat. Thread the barrel for a suppressor and you'd be "good to go".

Captain O
Captain O

"The Administration of Justice should be tempered by mercy, but mercy should never interfere with the true Administration of Justice".- Captain O

"Living well is the best revenge". - George Herbert

This post is approved by Arf, The Wonder Chicken.

DenStinett

  • Full Member
  • ***
  • Posts: 826
  • HALT, Who goes there?
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #12 on: December 29, 2015, 07:39:08 PM »
Hey SB:
I took some measurements of my 10mm Pistols

My Witness Compact Barrel is 3.682" and weighs 3.15 oz
The (old style) Slide is 6.42" and weighs 11.20 oz
The whole Upper weighs 15.25 oz

The Witness "Longslide Conversion" Barrel is 4.827" and weighs 3.95 oz
The (old style) Slide is 7.65" and weighs 13.30 oz (with Super Sights)
The whole Upper weighs 18.45 oz

My Delta Gold Cup
Barrel is 4.905" at 4.05 oz
Slide with fully adjustable Meprolight Sights is 7.45" at 13.25 oz
The full Upper with Hart's Recoil Reducing, Full Length Guide Rod is 19.95 oz
The (upgraded, as pictures) Lower weighs 17.05 oz
The Factory Magazine is 2.40 oz
The whole Pistol, less Magazines weighs 37.30 oz
So tell me again how Trump will be worse then the last 8 years !

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5628
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #13 on: December 30, 2015, 06:57:02 AM »
Thanks!  Table updated.

Intercooler

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7220
  • 10mm, when you care enough to send only the best!!
    • View Profile
Re: 10mm Handgun Spec Sheet
« Reply #14 on: December 30, 2015, 02:51:33 PM »
I can give you the weights for the Limited and Hunter. I'm guessing you aren't inputting lengths?