Author Topic: Ruger 10MM  (Read 7202 times)

TXCOONDOG

  • Jr. Member
  • **
  • Posts: 186
    • View Profile
Ruger 10MM
« on: May 22, 2014, 11:26:29 AM »
I'm a huge fan of Ruger Pistols. I contacted them and sked if a 10mm was in the works.

Their response:




Dear John Doe,


Thank you for using the Ruger On-Line Customer Support Request Form.

This e-mail is in response to your question or comment of 05/22/2014
Request No: 249006

Comment / question:

I'm a huge Ruger Pistol fan. Anyway, are there any plans for a 10mm pistol?

Hate to buy from another manufacture, if it's in the works

Response:
I am not currently aware of any plans for new products or calibers. I will pass on your request for consideration. We do appreciate your interest and input.

If you need further information, please visit our website at www.ruger.com or contact us at:

Revolvers, shotguns, rifles, 10/22 Charger Pistol: (603) 865-2442
Pistols: (928) 778-6555
Serial Number History Information: (603) 865-2424

Please note: This e-mail is sent from a notification-only address that cannot accept incoming e-mail. Please do not reply to this message.

Sincerely,
Ruger Firearms





The_Shadow

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 7401
    • View Profile
Re: Ruger 10MM
« Reply #1 on: May 22, 2014, 11:56:37 AM »
Yes, pretty much what they told me when I inquired about them making a Semi-Auto carbine rifle chambered in 10mm like that of the Deer Slayer 44 they made!  Its a damn shame they will not entertain the notion of something different.   :(
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

TXCOONDOG

  • Jr. Member
  • **
  • Posts: 186
    • View Profile
Re: Ruger 10MM
« Reply #2 on: May 22, 2014, 12:02:38 PM »
They may if enough inquires are made :D

dakota1911

  • Jr. Member
  • **
  • Posts: 127
    • View Profile
Re: Ruger 10MM
« Reply #3 on: July 31, 2014, 04:55:25 PM »
I wish some distributor would want them to build a SA revolver in 10mm/40S&W.  Lipsey, Talo, or whoever.  It might be worth it to contact some distributors like that.
NRA Life Member

DenStinett

  • Full Member
  • ***
  • Posts: 826
  • HALT, Who goes there?
    • View Profile
Re: Ruger 10MM
« Reply #4 on: July 31, 2014, 06:52:56 PM »
I wish some distributor would want them to build a SA revolver in 10mm/40S&W.  Lipsey, Talo, or whoever.  It might be worth it to contact some distributors like that.

I'd go for a Ruger Blackhawk and a Marlin 1894 both in 10mm
Then a GP100 and a Deerfield in 10mm
I LOVE a nice combo
So tell me again how Trump will be worse then the last 8 years !

Dave84

  • Full Member
  • ***
  • Posts: 621
    • View Profile
Re: Ruger 10MM
« Reply #5 on: July 31, 2014, 08:13:36 PM »
Hit them up several months ago and pretty much got that or a very similar response. Would love an SR in 10mm. Stay on 'em guys and continue to do good business with the manufacturers who do make what you want.

Bruno747

  • Jr. Member
  • **
  • Posts: 243
    • View Profile
Re: Ruger 10MM
« Reply #6 on: January 01, 2015, 07:00:20 PM »
Pretty much par for the course with us 10mm people.

A few months I went around begging each and every manufacturer to release one in 10mm. Smith and Wesson was the only one that was even willing to discuss it, and that was only if we could get a HUGE (Read 5000+) order on M&P's from the performance center. Again, that was only to discuss it.

EDIT: Holy thread revival Batman, I must be really tired, from the looks of the dates, the OP was sending this email to ruger about the same time I sent mine to them.

DenStinett

  • Full Member
  • ***
  • Posts: 826
  • HALT, Who goes there?
    • View Profile
Re: Ruger 10MM
« Reply #7 on: January 02, 2015, 07:37:31 PM »
Looking forward to going to this year's Shot Show
Hoping to see all the new 10mm offerings coming out
Maybe I'll be surprised   8)
So tell me again how Trump will be worse then the last 8 years !

Dave84

  • Full Member
  • ***
  • Posts: 621
    • View Profile
Re: Ruger 10MM
« Reply #8 on: January 06, 2015, 11:37:20 AM »
I hope there are some nice new realeases. When is shot show?

cigarman454

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: Ruger 10MM
« Reply #9 on: October 25, 2015, 02:33:04 PM »
I'm a big Ruger fan myself. Would really like to see a them come out with a 10mm

undeRGRound

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: Ruger 10MM
« Reply #10 on: December 26, 2015, 05:06:26 PM »
Pretty much par for the course with us 10mm people.

A few months I went around begging each and every manufacturer to release one in 10mm. Smith and Wesson was the only one that was even willing to discuss it, and that was only if we could get a HUGE (Read 5000+) order on M&P's from the performance center. Again, that was only to discuss it.

EDIT: Holy thread revival Batman, I must be really tired, from the looks of the dates, the OP was sending this email to ruger about the same time I sent mine to them.

M&P10LS? I'M IN!!!
Is that 5000 yet?  :))  :))

1911 guy

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Ruger 10MM
« Reply #11 on: June 21, 2016, 01:53:20 AM »
It'll happen soon enough I think

10fanatic

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Ruger 10MM
« Reply #12 on: January 27, 2017, 07:59:36 PM »
I believe you can get a GP100 357 and send it to clark custom for a 10mm conversion.  Pricey, but very nice.

talonhead

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Ruger 10MM
« Reply #13 on: June 13, 2017, 04:31:19 PM »
Info: Blackhawk 38-.40/10mm convertible was made years ago. If I remember correctly, the 10mm was the more accurate round in this gun.

Sonny10MM

  • Newbie
  • *
  • Posts: 48
    • View Profile
Re: Ruger 10MM
« Reply #14 on: June 14, 2017, 07:52:58 AM »
I wish Ruger had taken on the rebirth of the Bren Ten instead of Viltor. We would of seen the Bren Ten in 10MM and .45 at least and Ruger would of sold a lot of them.