Author Topic: RMW Extreme Build. It has begun.  (Read 30425 times)

Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
RMW Extreme Build. It has begun.
« on: February 21, 2015, 07:38:12 PM »
Picked up the RMW Grease Gun lower today. That thing is built like a TANK! A nicely built tank.

Received the 11" 10mm upper last Saturday. It came with the lower hardware, 1 grease gun mag, stock, etc. Not a bad deal. I have a POF trigger. I have ordered Diamondhead polymer sights and an Ergo grip. Oh and a pistol tube for testing. That should be everything. Once it proofs out, then I file with the ATF.

Started assembling the lower. Stuck at the bolt release roll pin. I need a roll pin starter punch/holder. It will go but I don't want to wail on the thing.

All is good - will take pictures at some point.


Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #1 on: February 22, 2015, 01:25:09 PM »
Here are a couple in work shots of my newest project as mentioned above.




Hermit

  • Newbie
  • *
  • Posts: 82
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #2 on: February 25, 2015, 01:23:51 AM »
Whats the chamber support look like?

Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #3 on: February 25, 2015, 03:45:45 AM »
Whats the chamber support look like?

Good question! It's pretty darn nice, like perfect. Better than any 10mm semi-automatic handgun I've groped. (I've not seen a S&W 610, so fair warning there). I'm going to run some hot stuff in this one methinks.

My gun trust successfully efiled the SBR eform last night.

I was starting to think some of my posts here are invisible  :D Thanks for the response!
« Last Edit: February 25, 2015, 03:47:25 AM by Pablo »

Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #4 on: February 25, 2015, 03:49:27 AM »
On Sunday I dialed in the mag catch:






Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #5 on: February 25, 2015, 07:14:30 PM »
I finished the bolt, bolt handle and installed the Diamond Head Polymer sights (lightweight but great sights)

http://www.diamondhead-usa.com/collections/polymer-sights/products/polymer-diamond-integrated-sighting-system-with-nitebrite

Upper is complete!

Still wanting for my roll pin starters to finish the lower!!

That said I got all the acknowledgement emails from ATF.

Hermit

  • Newbie
  • *
  • Posts: 82
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #6 on: February 25, 2015, 11:07:53 PM »
Whats the chamber support look like?

Good question! It's pretty darn nice, like perfect. Better than any 10mm semi-automatic handgun I've groped. (I've not seen a S&W 610, so fair warning there). I'm going to run some hot stuff in this one methinks.

My gun trust successfully efiled the SBR eform last night.

I was starting to think some of my posts here are invisible  :D Thanks for the response!

iv been pondering on picking one of these up since i dont own a ar or 223 but i have a few 10s...if i do get one id probably go the sig brace route if i still can at the time

Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #7 on: February 26, 2015, 03:56:54 AM »
Mine is still a pistol. So testing will occur with a Sig brace and a pistol buffer tube.

Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #8 on: February 26, 2015, 02:49:37 PM »
Here is the completely finished upper (well I still need to Loctite things):


Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #9 on: February 26, 2015, 02:56:15 PM »
The lower......I just finally got my roll pin starter for the bolt release lever roll pin. Wow that bad boy saved my bacon. Anyway got that done and installed the safety lever and cheezy kit grip. Waiting on pistol tube now. Slow!!! Lower almost done. No scratches or dings.

sstewart

  • Full Member
  • ***
  • Posts: 569
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #10 on: February 26, 2015, 06:26:41 PM »
You are making me want one of these.  :P

10mmfan

  • Jr. Member
  • **
  • Posts: 322
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #11 on: February 27, 2015, 10:23:07 AM »
You can't stop insane people from doing insane things by passing insane laws--that's insane!" -- Penn Jillette

Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #12 on: February 27, 2015, 10:37:52 AM »
I am aware of that.  Not sure what your point is (?)

sqlbullet

  • Moderator
  • Sharpshooter
  • *****
  • Posts: 5770
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #13 on: February 27, 2015, 01:20:10 PM »
I really wanna see them argue in court that a you become a felon based on how you hold a gun.

Pablo

  • Full Member
  • ***
  • Posts: 877
    • View Profile
Re: RMW Extreme Build. It has begun.
« Reply #14 on: February 27, 2015, 02:08:36 PM »
The rest of the parts arrived today. I have another 10mm pistol now.

Did I mention this thing looks completely bad ass with the grease gun magazine hanging down? M3 meet AR. Yeah baby. Need to hit the range.