10mm-firearms.com

Firearms => Miscellaneous 10mm Firearms => Topic started by: Ramjet on November 17, 2017, 05:43:31 PM

Title: Kriss Vector Carbine in 10MM
Post by: Ramjet on November 17, 2017, 05:43:31 PM
Well I recieved my carbine today. Unfortunately it was close to dark when I got home I was able to run one mag of 200 grain WFN GC cast load of over some Power Pistol. I can say this the carbine is unusual looking but is everything they advertise. Muzzle rise nonexistent decent accuracy. I mounted an ultra dot still need to sight it in. But I am very impressed so far. Range report after deer season.
Title: Re: Kriss Vector Carbine in 10MM
Post by: Ramjet on November 19, 2017, 12:16:54 PM
Had some additional time with the Kriss. I shot some 180 grain hand loads Gold Dot pull downs and using the Ultra Dot I mounted it ran really well. Muzzle rise non existent and accuracy was good at 40 yards offhand ran about 4". I loaded some 200 grain WFN GC from an Accurate mould loaded over a max load of Power Pistol these really shoot fantastic. Extremely accurate shooting just over 2.5" at 50 yards. This gun is everything it advertised as I will get some comparative data on velocity after deer hunting is over. But this gun was worth the money.
Title: Re: Kriss Vector Carbine in 10MM
Post by: The_Shadow on November 19, 2017, 01:24:49 PM
How did your brass look?  Gives an idea of chamber support...
Title: Re: Kriss Vector Carbine in 10MM
Post by: Ramjet on November 20, 2017, 04:04:42 PM
In a standard Glock BBl I would have the tell tale bulge from the Kriss it looked similar to the KKM after market barrel for my model 40. The chamber support is outstanding.
Title: Re: Kriss Vector Carbine in 10MM
Post by: johnholliday on November 21, 2017, 01:13:55 PM
Yeah, kind of wish that I wouldn’t have clicked on this post. Now I need to add this to my things that I need list.


Sent from my iPhone using Tapatalk
Title: Re: Kriss Vector Carbine in 10MM
Post by: Ramjet on November 21, 2017, 01:37:09 PM
The more I run this weapon the more I like it the follow up shots are easily keeper in the same area as the original shot. As fast as I can pull the trigger nice groups and the accuracy is good. Might take this bad boy deer hunting tomorrow with the 200 WFN GC cast loads tomorrow.
Title: Re: Kriss Vector Carbine in 10MM
Post by: CZ223 on December 27, 2017, 02:54:57 PM
Ramjet, I am new to the group and just posted that I just picked up a Kriss Vector 10mm yesterday.  I am glad to see that you like yours.  I was wondering if you know of any aftermarket mags for it that hold more than the standard Glock 15 rounders.  I have not searched the internet yet but since I was here I thought I would ask.
Title: Re: Kriss Vector Carbine in 10MM
Post by: Ramjet on December 29, 2017, 07:19:47 PM
I would suggest going to Glock Store or or Glock Miester they may have mag extenders.
Title: Re: Kriss Vector Carbine in 10MM
Post by: sqlbullet on December 31, 2017, 10:33:19 AM
Several of us have converted the Kriss 45 ACP mag extensions to work with our G20 mags.  I have four that hold about 33 rounds.  There are a number of youtube videos about how to make these work.

It is not a drop in kit.  You have to take a file or dremel to the inside of the base of the G20 mag to relieve a ledge where it meets the extension, modify the mag spring wher it interfaces with the follower and modify the mag spring to be a bit narrower to fit in the G20 body at the top.  It sounds worse than it is.  I did all four of mine in about an hour.