Home › Forums › Reloading 10mm Ammo › Small Primer Pocket in 10mm
- This topic has 6 replies, 4 voices, and was last updated 1 week, 4 days ago by Alaska556.
-
AuthorPosts
-
-
February 29, 2024 at 6:18 pm #2113Alaska556Participant
The 45 Super has performed excellent with 45 ACP Fed Nickle brass with Small Primer pockets using 7.5 Rem Primers. Has anyone had similar results with 10mm and Small Primer Pockets ?
No blown primer pockets or Glock smiles !- This topic was modified 1 month, 2 weeks ago by Alaska556.
- This topic was modified 1 month, 2 weeks ago by Alaska556.
Attachments:
You must be logged in to view attached files. -
March 1, 2024 at 8:13 am #2117The_ShadowModerator
The few small primered 10mm brass I have I’m making 9x25Dillon with those…all good
-
March 1, 2024 at 8:34 am #2118
-
March 3, 2024 at 8:25 am #2120Frank500sParticipant
I’ve loaded small primer pocket 10mm. Power pistol and longshot are what I use. AA9 may Have ignition issues in cold weather. Could be a nonissue, I’ll try it as soon as my Dillon part arrives.
-
March 8, 2024 at 10:43 am #2142Alaska556Participant
Ignition Issues with AA9 in small primer pockets can be solved with Rem 7.5 Small rifle primers in 10mm.
-
April 6, 2024 at 11:07 am #2190NHansen79Participant
I only use small primer brass. I’ve been loading AA9 pretty much since I first got the pistol. I don’t have any issues with ignition. I’ve got 200gr Nosler ASP bullets loaded and get about 1175out of them. I could go higher in charge. But that’s where they were most accurate. And I didn’t have my chrony when I loaded them.
I’m running 13.2gr aa9. And I only use small rifle primers in my pistol rounds. 9, 10mm and 45acp. Just makes it handy for buying- This reply was modified 1 week, 4 days ago by NHansen79.
-
April 6, 2024 at 2:44 pm #2192Alaska556Participant
I run 190 Sierra FPJ and AA9 at 13.7
With REM 7.5 in small primer pockets in my G20.
I have used it many times finishing off moose.
Really like small primer pockets in 10mm and 45 Super
-
-
AuthorPosts
- You must be logged in to reply to this topic.